Reference

Error codes

How Avinox reports faults, plus the codes owners have actually seen: what they mean and what fixed them.

Read this first

There is no official code list

Unlike Bosch or Shimano, Avinox doesn't publish a public fault-code table. When the system detects a problem, a warning appears on the control display. Riders mostly learn the codes from the screen, the app and their dealer.

  1. On the bike: swipe up on the display → Settings → System Status to see the warning details and suggested fix.
  2. In the app: Avinox Ride → Help → Support → Drive System Errors to export logs and send them to Avinox support.
  3. Below: codes reported by owners, with links to the original reports. Seen one that's not listed? Send me the code, the bike and what fixed it.
0x160900abCritical

Main battery communication error

Battery · Amflow (Avinox M2) with parallel external batteryCommunity report

Communication with the main battery is lost and the motor shuts down. Reported with a third-party external battery wired in parallel, appearing when the main battery reached 70–80 %.

What to do

  1. Remove any third-party range extender. Amflow support reportedly says they are not supported.
  2. Use the official dual-battery setup instead (M2 / M2S, firmware v01.03.01.10 or later).

Source: eMTB Forums — battery comms error 0x160900ab

0x2701007aCritical

Motor error (reported together with 0x27030021)

Motor · Avinox M2 / M2SCommunity report

A motor fault code seen alongside the unofficial-battery error. In the reported case the dealer replaced components while troubleshooting.

What to do

  1. Restart the system and update app + firmware.
  2. Export logs via the app and take the bike to a dealer.

Source: eMTB Forums — Avinox motor system error message

0x27030021Critical

Unofficial battery — motor power cut off

Battery · Amflow PX Carbon (Avinox M2 / M2S)Community report

The system does not recognise the battery as genuine and cuts motor assistance. Riders report it appearing mid-ride, in some cases after a firmware update, even with the original battery fitted.

What to do

  1. Hold the power button on the control display for about 20 seconds to force a restart (reported to clear it).
  2. Make sure both the Avinox Ride app and the drive-system firmware are on the latest version.
  3. If it comes back, export the logs (App → Help → Support → Drive System Errors) and contact your dealer.

Source: eMTB Forums — Avinox motor system error message